Description
Discover the Groom-X Super Power Bather Pump, a modern solution for faster and more effective dog bathing with 75% less water consumption.
Do you feel like you're using too much water, time, and energy when bathing your dog? The Groom-X Super Power Bather Pump is a modern solution that allows for faster and more effective coat care, as well as deep cleansing with 75% less water consumption. The Groom-X Super Power Bather Pump will make bathing easier and more enjoyable than ever.
Features:
- Circulation pump, flexible hose, and spray nozzle equipped with a valve for regulating water pressure.
- Perfect for washing smaller breeds, puppies, older animals, and sensitive areas.
- Convenient spray nozzle distributes shampoo and water throughout the coat.
- Handles stubborn stains without using large amounts of water.
- Efficiency and time savings: bathing can be done in one step instead of three.
- Less dirt and shampoo residue remain, making drying easier.
- Removes loose undercoat easily.
- Saves cosmetics, water, energy, and money.
- Environmentally friendly and gentle on fur.
Benefits:
- High efficiency – max. 100 l/min water flow.
- Saves up to 75% on shampoo, 75% on water, and 50% on time.
- Can be used with both shampoo and conditioner.
Included in the Set:
- Circulation pump with a filter.
- Reinforced, flexible 160cm hose.
- Nozzle with a water pressure control valve.
- Remote control button - can be mounted on the wall or placed on the ground.
Technical Data:
- Pump capacity: max. 100 l/min.
- Power: 0.25kW.
- Voltage: 220-240V.
- Hose length / diameter: 160cm / 2.5cm.
Maintenance and Cleaning Instructions:
Cleaning the Super Power Bather bath pump is very simple. Pet hair and dirt removed during grooming may be at the bottom of the pump. Always remove them after each wash. To disinfect the pump, fill the bathtub with water and a measuring cup of vinegar from time to time, which will help easily remove any remaining dirt and shampoo. To prevent the spread of bacteria, the pump can also be placed in a bucket with disinfectant. Turn on the pump, allow it to absorb the disinfectant, and then turn it off. This will properly disinfect the device and hose.
How to Use the Super Power Bather:
Before using it for the first time, ensure there is water in the pump. Disconnect the flexible hose and pour approximately 300ml of water into the pump or place it in a bucket (the water level should be at least 9cm high). Then, turn on the pump. The device can be turned on and off using the included rubber foot switch, which operates using air pressure. The button can be placed on the floor or mounted on the wall. Press the button once and release to turn the pump on. Press it again and release to turn the pump off. Place the pump in the bathtub. Insert the stopper into the bathtub drain to keep the water flowing. Fill the bathtub with water to the level (3-5cm). Add a small amount of shampoo to the water (average about a small bottle cap, but this also depends on the dog's size, coat type, and level of dirt). You can also use the Super Power Bather pump with conditioners. Press the foot switch to start the pump. Thoroughly wash your dog's coat, holding the nozzle about 2 cm away. Continue this process depending on the size of your dog and how dirty the coat is. The average time is usually about 5 minutes. If your dog is very dirty, change the water to clean and add another scoop of shampoo.
